Gamma 5003 소유자 매뉴얼 - 페이지 6
{카테고리_이름} Gamma 5003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5003 20 페이지. 6 point mounting
Gamma 5003에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (20 페이지)
페이지 인쇄
ASSEMBLY INSTRUCTIONS
Bellows Installation
The bellows assembly is supplied in two
pieces and should be assembled as follows.
Place the bellows section with the flange over
the upper support column with the flange on
the top. Place the remaining bellows over
the upper support column and mate it with
the flange on the lower bellows.
Tool Tray Installation
Lower the tool tray over the top of the upper
column support and let it rest loosely on the
bellows assembly.
Tension Track Installation
Place the tube of the tension track assembly
over the top of the upper column support and
align the tension track with the long leg of the
base. Securely tighten the two socket set
screws on the tension track assembly tube,
locking it to the upper column support. Align
the notch in the tool tray with the tension
track bar while raising the tool tray. Secure
the tray with the set screws in the side of
the tray casting.
6