Gamma 5003 소유자 매뉴얼 - 페이지 17
{카테고리_이름} Gamma 5003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 5003 20 페이지. 6 point mounting
Gamma 5003에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (20 페이지)
TROUBLESHOOTING TIPS
PROBLEM
String slips in clamps
String slips in gripper
String clamp base slips on turntable
String tension too tight or too loose
With time and use, the clamping surfaces of your machine may become oily or dirty and result
in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String Clamp
Base and String Gripper is recommended. Knife sharpening stones work well for cleaning the
diamond coated string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol
and a mild abrasive tool such as a toothbrush also works well to remove oily or greasy build up.
CARE & CLEANING
SOLUTION
- Adjust gap between clamp jaws
- Clean clamp jaws
- Clean gripper jaws
- Adjust gripper jaw stop screw
- Clean bottom of clamp & top of turntable with
alcohol
- Adjust clamp base locking nut
- Check tension using a tension calibrator,
adjust machine calibration if necessary
17