Gamma 5003 Руководство пользователя - Страница 17

Просмотреть онлайн или скачать pdf Руководство пользователя для Машины для изготовления струн Gamma 5003. Gamma 5003 20 страниц. 6 point mounting
Также для Gamma 5003: Руководство пользователя (20 страниц), Руководство пользователя (19 страниц), Руководство пользователя (20 страниц)

TROUBLESHOOTING TIPS

PROBLEM

String slips in clamps

String slips in gripper

String clamp base slips on turntable

String tension too tight or too loose

With time and use, the clamping surfaces of your machine may become oily or dirty and result

in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String Clamp

Base and String Gripper is recommended. Knife sharpening stones work well for cleaning the

diamond coated string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol

and a mild abrasive tool such as a toothbrush also works well to remove oily or greasy build up.

CARE & CLEANING

SOLUTION

- Adjust gap between clamp jaws

- Clean clamp jaws

- Clean gripper jaws

- Adjust gripper jaw stop screw

- Clean bottom of clamp & top of turntable with

alcohol

- Adjust clamp base locking nut

- Check tension using a tension calibrator,

adjust machine calibration if necessary