Gamma 5003 Owner's Manual - Page 17

Browse online or download pdf Owner's Manual for Stringing Machines Gamma 5003. Gamma 5003 20 pages. 6 point mounting
Also for Gamma 5003: Owner's Manual (20 pages), Owner's Manual (19 pages), Owner's Manual (20 pages)

Gamma 5003 Owner's Manual

TROUBLESHOOTING TIPS

PROBLEM
String slips in clamps
String slips in gripper
String clamp base slips on turntable
String tension too tight or too loose
With time and use, the clamping surfaces of your machine may become oily or dirty and result
in string or clamp slippage while stringing. Periodic cleaning of the String Clamps, String Clamp
Base and String Gripper is recommended. Knife sharpening stones work well for cleaning the
diamond coated string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol
and a mild abrasive tool such as a toothbrush also works well to remove oily or greasy build up.
CARE & CLEANING
SOLUTION
- Adjust gap between clamp jaws
- Clean clamp jaws
- Clean gripper jaws
- Adjust gripper jaw stop screw
- Clean bottom of clamp & top of turntable with
alcohol
- Adjust clamp base locking nut
- Check tension using a tension calibrator,
adjust machine calibration if necessary
17