Gamma 6004 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 20 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지)

페이지 인쇄

STRINGING THE FRAME

Travel Stop

Setting the Gripper Jaw Spacing

The gripper jaws of the tensioner are adjust-

able to accommodate varying string gauges.

If the string slips through the gripper jaws

while pulling tension, rotate the gripper jaw

adjustment screw counter-clockwise.

If the string is damaged while pulling tension,

rotate the gripper jaw adjustment screw

clockwise.

The jaws will be properly adjusted when

there is enough pressure to securely grip the

string without causing damage to the string.

Tensioner Travel Stop

To prevent contact between the tension head

and the racquet and/or turntable, a travel stop

is located about midpoint along the tensioner

bar below the gear track. In the event the

tension head must be moved closer to the

racquet, pull and turn the travel stop 90 de-

grees. To re-engage the travel stop, simply

pull and turn the travel stop 90 degrees.

Pulling Tension

Wrap the loose section of string once around

the roller and insert the string between the

diamond dust coated string gripper plates.

Pull the string perpendicular to the gripper

plates while slowly rotating the tensioner

crank clockwise until the brake lever pops

out of the latching block. The string is now

tensioned and can be clamped in place with

the remaining fixed clamp.

Repeat the above steps until all main strings

are installed. Tie off ends of main strings as

per racquet manufacturers recommenda-

tions.