Gamma 6004 소유자 매뉴얼 - 페이지 18

{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 20 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지)

Gamma 6004 소유자 매뉴얼
PROBLEM
String slips in clamps
String slips in gripper
String clamp base slips on turntable.
Tensioner slips on Tensioner Bar
after brake lever is released.
String tension too tight or too loose
With time and use, the clamping surfaces of your machine may become oily or dirty and result in string or clamp
slippage while stringing. Periodic cleaning of the following parts is recommended.
String Clamps
Clean the inside gripping surfaces of the string clamp jaws by inserting a cloth or pipe cleaner soaked with isopropyl
alcohol between the jaws and rub back and forth. If the build-up is excessive, dismantle the string clamp jaws to
expose the gripping surfaces by removing the adjustment knob. Using a small nylon brush, (such as a toothbrush),
scrub the inside surfaces until all debris is removed. Clean the jaws with isopropyl alcohol and re-assemble.
String Clamp Base
Clean the base of the clamps and the top of the turntable with isopropyl alcohol.
String Gripper
Clean inner gripping surfaces with isopropyl acohol soaked cloth or pipe cleaner.
TROUBLESHOOTING TIPS
For additional assistance, contact Customer Service

CARE and CLEANING

17
SOLUTION
- Adjust gap between jaws
- Clean clamp jaws
- Clean gripper jaws
- Adjust Gripper Jaw Stop Screw
- Adjust Base Locking Levers
- Clean Turntable Clamp Glide Rails
- Adjust tensioner brake lever
- Clean tensioner brake disc
- Check tension using a tension
calibrator and adjust machine calibra
tion if necessary