Gamma 6004 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Gamma 6004에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma 6004 20 페이지. 6 point mounting
Gamma 6004에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (19 페이지)

페이지 인쇄

MOUNTING THE FRAME

Height Adjustment

The turntable height of the GAMMA 6004 can be ad-

justed to suit the stringer. To adjust, loosen the two set

screws on the lower column support post below the

bellows assembly. Adjust the amount of engagement

between the upper and lower column supports until the

desired height is attained. Make sure that the tension

track is still aligned with the long leg of the base and

tighten the two set screws to lock the upper support

column into place.

Frame Support Post Adjustment

Place the racquet frame over the center support slide

and onto the frame support. Loosen the lever lock bolt on

one support post. Slide the post outward until the center

support of the racquet support slide is positioned near

the inside surface of the racquet frame. Securely tighten

the lever lock bolt.

Adjust the opposite post using the same procedure.

Caution: To avoid racquet damage, the support slide

should not contact the racquet prior to fixing the support

posts.

Shoulder Support Adjustment

The shoulder supports on the GAMMA 6004 are adjust-

able to provide support to the racquet frame. Loosen the

knurled knob at the bottom of the shoulder support and

swivel the support so that the pads will contact the frame

squarely when the arms are closed against the racquet.

Should the shoulder supports block string holes, adjust

the position of the racquet between the arms until the

shoulder supports contact the racquet between grom-

met holes.