Gamma 6004 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Besaitungsmaschinen Gamma 6004 herunter. Gamma 6004 20 Seiten. 6 point mounting
Auch für Gamma 6004: Benutzerhandbuch (20 seiten), Benutzerhandbuch (20 seiten), Benutzerhandbuch (19 seiten)

Gamma 6004 Benutzerhandbuch

MOUNTING THE FRAME

Height Adjustment
The turntable height of the GAMMA 6004 can be ad-
justed to suit the stringer. To adjust, loosen the two set
screws on the lower column support post below the
bellows assembly. Adjust the amount of engagement
between the upper and lower column supports until the
desired height is attained. Make sure that the tension
track is still aligned with the long leg of the base and
tighten the two set screws to lock the upper support
column into place.
Frame Support Post Adjustment
Place the racquet frame over the center support slide
and onto the frame support. Loosen the lever lock bolt on
one support post. Slide the post outward until the center
support of the racquet support slide is positioned near
the inside surface of the racquet frame. Securely tighten
the lever lock bolt.
Adjust the opposite post using the same procedure.
Caution: To avoid racquet damage, the support slide
should not contact the racquet prior to fixing the support
posts.
Shoulder Support Adjustment
The shoulder supports on the GAMMA 6004 are adjust-
able to provide support to the racquet frame. Loosen the
knurled knob at the bottom of the shoulder support and
swivel the support so that the pads will contact the frame
squarely when the arms are closed against the racquet.
Should the shoulder supports block string holes, adjust
the position of the racquet between the arms until the
shoulder supports contact the racquet between grom-
met holes.
8