Gamma Progression 602 FC 소유자 매뉴얼 - 페이지 14

{카테고리_이름} Gamma Progression 602 FC에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Progression 602 FC 16 페이지.
Gamma Progression 602 FC에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)

페이지 인쇄

TROUBLESHOOTING TIPS

PROBLEM

String slips in clamps.

String slips in gripper.

String clamp base slips on turntable.

With time and use, the clamping surfaces of your machine may become oily or dirty and result in string or clamp

slippage while stringing. Periodic cleaning of the following parts is recommended.

String Clamps

Clean the inside gripping surfaces of the string clamp jaws by inserting a cloth or pipe cleaner soaked with isopropyl

alcohol between the jaws and rub back and forth. If the build-up is excessive, dismantle the string clamp jaws to

expose the gripping surfaces by removing the adjustment screw. Using a small nylon brush, (such as a toothbrush),

scrub the inside surfaces until all debris is removed. Clean the jaws with isopropyl alcohol and re-assemble.

String Clamp Base

Clean the base of the clamps and the top of the turntable with isopropyl alcohol.

String Gripper

Follow the same procedure for cleaning the string clamps.

- Adjust gap between jaws.

- Clean clamp jaws.

- Clean gripper jaws.

- Make sure string is wrapped over top jaw of

- Clean Clamp Base and Turntable surface.

CARE and CLEANING

SOLUTION

gripper prior to inserting between gripper jaws.