Gamma Progression 602 FC Manuale d'uso - Pagina 14

Sfoglia online o scarica il pdf Manuale d'uso per Macchine incordatrici Gamma Progression 602 FC. Gamma Progression 602 FC 16.
Anche per Gamma Progression 602 FC: Manuale d'uso (16 pagine)

Stampa la pagina

TROUBLESHOOTING TIPS

PROBLEM

String slips in clamps.

String slips in gripper.

String clamp base slips on turntable.

With time and use, the clamping surfaces of your machine may become oily or dirty and result in string or clamp

slippage while stringing. Periodic cleaning of the following parts is recommended.

String Clamps

Clean the inside gripping surfaces of the string clamp jaws by inserting a cloth or pipe cleaner soaked with isopropyl

alcohol between the jaws and rub back and forth. If the build-up is excessive, dismantle the string clamp jaws to

expose the gripping surfaces by removing the adjustment screw. Using a small nylon brush, (such as a toothbrush),

scrub the inside surfaces until all debris is removed. Clean the jaws with isopropyl alcohol and re-assemble.

String Clamp Base

Clean the base of the clamps and the top of the turntable with isopropyl alcohol.

String Gripper

Follow the same procedure for cleaning the string clamps.

- Adjust gap between jaws.

- Clean clamp jaws.

- Clean gripper jaws.

- Make sure string is wrapped over top jaw of

- Clean Clamp Base and Turntable surface.

CARE and CLEANING

SOLUTION

gripper prior to inserting between gripper jaws.