Gamma X-6FC 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Gamma X-6FC에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma X-6FC 20 페이지.
Gamma X-6FC에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)

ASSEMBLY INSTRUCTIONS

center posts should not contact the racquet prior to locking down the support posts.

MOUNTING THE FRAME

String Clamp Installation

The post of the string clamp and tube of

the string clamp base are treated with

grease to provide protection against corro-

sion during shipping. Remove any exces-

sive grease with a clean cloth prior to use.

The post and tube may also be cleaned

with isopropyl alcohol. After this type of

thorough cleaning, the post and tube

should be treated with a light coating of

machine oil to protect the surfaces against

corrosion and to ensure smooth operation.

Adjusting the Frame Support Posts

Loosen the lock bolts of the frame support

posts and space them apart with the frame

support slides separated by the approximate

length of the racquet head. Although it is not

required, it is good practice to center the sup-

port posts on the turntable. Lock one of the

posts in position by tightening the lock bolt and

position the other post until the frame support

slide is positioned near the inside surface of

the racquet frame. Securely tighten the lock

bolt of the second support post.

Caution: To avoid racquet damage, the

Tightening the Frame Supports

Tighten the Frame Support Slides by turn-

ing the adjustment knob clockwise until

snug against the racquet frame and slight

resistance is felt.

Caution: Overtightening the Center Sup-

ports will stretch the head of the racquet and

could cause racquet damage.