Gamma X-ST 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Gamma X-ST에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma X-ST 19 페이지.
Gamma X-ST에 대해서도 마찬가지입니다: 소유자 매뉴얼 (19 페이지), 소유자 매뉴얼 (19 페이지)

ASSEMBLY INSTRUCTIONS

Remove and Discard Plastic Washers

Turntable Installation

To install the turntable remove the four nuts

underneath holding the mounting bolts in

place. Position the turntable over the turn-

table pin and align the bolts with the holes in

the flange. Secure them with the included

allen wrench.

Note: When purchased with the optional

floor stand, it is most convenient to attach the

base to the floor stand at this point. See

instructions provided with the optional floor

stand.

Support Post Installation

To install the support posts you must first

remove the mounting bolt from the mounting

plate that sets inside the central cavity of the

turntable. There are large holes stamped on

the underside of the turntable that allow you

to support the mounting plate with your

fingers while removing the mounting bolt.

Support Post Installation (con't)

After removing the mounting bolt, remove

and discard the plastic washers that are

installed for shipping purposes.