Gamma Cove LED 200 사용자 설명서 - 페이지 3

{카테고리_이름} Gamma Cove LED 200에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Cove LED 200 12 페이지. Cool white & warm white led par/wash

Introduction and Setup

Thank you for choosing our Cove LED 200. For your own safety, please read this manual

before installing or using the device. This manual covers the important information on

installation and applications. Please install and operate the fixture with following

instructions. Meanwhile, please keep this manual for future needs.

Inside the box you will find:

The Cove LED 200 Fixture –

•

Power Cable -

•

DMX Signal Cable -

•

Owners Manual -

•

Use a clamp rated for the full weight of the LED Cove 200 to hang the fixture from the

mount(s) on the fixture's yoke.

As an added safety measure be sure to attached at least one properly rated safety

cable to the fixture using on of the safety cable rigging point integrated in the base

assembly or on the yoke.

Variable white LED par/wash lighting

•

200w COB LED for high brightness

•

DMX Control and Standalone Modes

•

Caution: For added protection mount the fixtures in areas outside walking paths, seating

areas, or in areas were the fixture might be reached by unauthorized personnel.

Before mounting the fixture to any surface, make sure that the installation area can hold a

minimum point load of 10 items the device's weight.

COVE LED 200 CW/WW – GAMMA LED Vision

Page 3 of 12