Gamma Cove LED 200 User Manual - Page 3
Browse online or download pdf User Manual for Lighting Equipment Gamma Cove LED 200. Gamma Cove LED 200 12 pages. Cool white & warm white led par/wash
Print Page
Introduction and Setup
1.
Unpacking and In the Box
Thank you for choosing our Cove LED 200. For your own safety, please read this manual
before installing or using the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following
instructions. Meanwhile, please keep this manual for future needs.
Inside the box you will find:
The Cove LED 200 Fixture –
•
Power Cable -
•
DMX Signal Cable -
•
Owners Manual -
•
Mounting and Operation
Use a clamp rated for the full weight of the LED Cove 200 to hang the fixture from the
mount(s) on the fixture's yoke.
As an added safety measure be sure to attached at least one properly rated safety
cable to the fixture using on of the safety cable rigging point integrated in the base
assembly or on the yoke.
Features
Variable white LED par/wash lighting
•
200w COB LED for high brightness
•
DMX Control and Standalone Modes
•
Safety Precautions
Caution: For added protection mount the fixtures in areas outside walking paths, seating
areas, or in areas were the fixture might be reached by unauthorized personnel.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 items the device's weight.
COVE LED 200 CW/WW – GAMMA LED Vision
1
1
1
1
Page 3 of 12