Gamma Silhouette Borealis X Z 사용자 설명서 - 페이지 6

{카테고리_이름} Gamma Silhouette Borealis X Z에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamma Silhouette Borealis X Z 18 페이지. Led moving wash/beam

페이지 인쇄

2. Setup and Operation

Using the LCD Menu and Buttons

The Borealis X Z features a standard LCD screen and buttons for operation. Press Menu

to enter the menu. Use the Up and Down arrows to navigate through the options and

press Enter to go into the menu or confirm your selection. The menu will automatically

exit after a period of inactivity.

DMX Address

Channl Set

Show Mode

Slave Mode

Black Out

Sound Mode

Sound Sense

Display Invert

Pan Inverse

Tilt Inverse

P/T Feedback

Bk P/T Moving

Dimmer Curve

Silhouette Borealis X Z – GAMMA LED Vision

001-512

Set the DMX starting address of the light.

Set the DMX channel mode.

10CH,

15CH,

21CH,

37CH, and

39CH

Show 01-04 Set the autoprogram mode.

Master,

Sets the master/slave mode for "Show Mode" operation

Slave 1,

with multiple fixtures connected via DMX cables.

Slave 2

Set the preference for behavior at DMX loss. "Yes" makes

Yes, No

the fixture blackout when DMX is lost, "No" puts the fixture

into "Show Mode" when DMX is lost.

Yes, No

Turns on Sound-Active mode.

0-100

Sets the microphone sensitivity for sound-active mode.

Yes, No

Flips the display for hanging fixtures.

Yes, No

Inverts the pan.

Yes, No

Inverts the tilt.

Yes, No

P/T Feedback moves the head back into place when it is

knocked. You may turn it off via this menu, though it is not

recommended in normal circumstances.

Yes, No

When "Yes" is set, the fixture will black out when it moves

between positions.

Linear,

Set the dimmer curve as follows:

Square Law,

Inverse

Square Law,

S-Curve

Page 6 of 18