Gamma Silhouette Borealis X Z User Manual - Page 6

Browse online or download pdf User Manual for DJ Equipment Gamma Silhouette Borealis X Z. Gamma Silhouette Borealis X Z 18 pages. Led moving wash/beam

2. Setup and Operation

Using the LCD Menu and Buttons

The Borealis X Z features a standard LCD screen and buttons for operation. Press Menu
to enter the menu. Use the Up and Down arrows to navigate through the options and
press Enter to go into the menu or confirm your selection. The menu will automatically
exit after a period of inactivity.
Menu
DMX Address
Channl Set
Show Mode
Slave Mode
Black Out
Sound Mode
Sound Sense
Display Invert
Pan Inverse
Tilt Inverse
P/T Feedback
Bk P/T Moving
Dimmer Curve
Silhouette Borealis X Z – GAMMA LED Vision
001-512
Set the DMX starting address of the light.
Set the DMX channel mode.
10CH,
15CH,
21CH,
37CH, and
39CH
Show 01-04 Set the autoprogram mode.
Master,
Sets the master/slave mode for "Show Mode" operation
Slave 1,
with multiple fixtures connected via DMX cables.
Slave 2
Set the preference for behavior at DMX loss. "Yes" makes
Yes, No
the fixture blackout when DMX is lost, "No" puts the fixture
into "Show Mode" when DMX is lost.
Yes, No
Turns on Sound-Active mode.
0-100
Sets the microphone sensitivity for sound-active mode.
Yes, No
Flips the display for hanging fixtures.
Yes, No
Inverts the pan.
Yes, No
Inverts the tilt.
Yes, No
P/T Feedback moves the head back into place when it is
knocked. You may turn it off via this menu, though it is not
recommended in normal circumstances.
Yes, No
When "Yes" is set, the fixture will black out when it moves
between positions.
Linear,
Set the dimmer curve as follows:
Square Law,
Inverse
Square Law,
S-Curve
Page 6 of 18