Green Air Designs Su-27 Flanker 사용 설명서 - 페이지 2

{카테고리_이름} Green Air Designs Su-27 Flanker에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Air Designs Su-27 Flanker 17 페이지.

Step 1 – Basic Fuse Construction

Refer to Drawings on page "step one" for basic build.

1. Glue the carbon tube/Ally Box spar in to wing slot (trim to length If

required).

2. Shape wing to aerofoil (shown on wing shaping page).

3. Dry fit fuse parts FB1, FB2, and wing.

4. Lay F2, F3 and F4 on to place using drawings provided, and check for

alignment.

5. When happy, glue, or use the glueless method, the parts into place.

6. Rough shape the lifting section to shape shown.

What we are attempting to do here is to build the model into modules for

assembly later. It is also a good idea to sand the majority of shapes in when

building the modules so less shaping is required later.