DECK DOLLY AutoConnect JD 7 Series 조립 지침 매뉴얼 - 페이지 6
{카테고리_이름} DECK DOLLY AutoConnect JD 7 Series에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DECK DOLLY AutoConnect JD 7 Series 8 페이지.
페이지 인쇄9) Assemble the bottom bracket parts and tighten the 5/8" bolt and make a mirror image
pair.
9)
Assemble the brackets as shown below leaving bolts loose at this time.
10) With the Deck Dolly preassembled, lay the unit over the deck and align the bottom
bracket 5/8" bolt with the decks factory auto connect mounts. Depending on how it fits
you may have to flip the brackets to the other side of the Upright as shown below.
Usually this happens if the deck's factory bracket touches the Deck Dolly's wheel. The
point here is to carry the deck as low as possible without interfering with the Dolly.
Once satisfied with the fit, you may now tighten the bracket bolts. See picture below.
6