DECK DOLLY AutoConnect JD 7 Series 조립 지침 매뉴얼 - 페이지 7
{카테고리_이름} DECK DOLLY AutoConnect JD 7 Series에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DECK DOLLY AutoConnect JD 7 Series 8 페이지.
페이지 인쇄Be sure to set the width of the dolly to hold the dolly as shown below to hold the deck
mount as close to the bracket as possible.
11) Align the Upper Deck Support into the front deck mount leaving about an 1/8" of
space between the ½" rod and the top of the deck mount. This is to insure that when in
the upright position the weight of the deck is on the lower mounts. Tighten these bolts.
Dolly should appear as shown below.
7