Major Manufacturing HIT-66-274 사용 설명서 - 페이지 8

{카테고리_이름} Major Manufacturing HIT-66-274에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major Manufacturing HIT-66-274 10 페이지. Template for sargent “in” series cylindrical lock

페이지 인쇄

Use a 1" hole saw

and drill the wire

hole. Drill this hole

half way from both

sides of the door.

Back the hole saw

out once or twice

when drilling to clear

the chips from the

cut.

If installing the

optional external

DPS, drill this hole

with a 3/8" drill bit to

the wire chase hole.

Be sure to back the

drill bit all the way out

of the guide to clear

chips. This will require

a longer than normal

drill bit. If installing on

a steel door, increase

the 3/8" hole to 3/4"

with the use of a step

drill.

To drill the wire

raceway, remove the

drill plate on the

INSIDE of the door

and replace with the

auxiliary raceway drill

guide.

Major Manufacturing Inc

PAGE 7