Major Manufacturing HIT-66-274 Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Torno Major Manufacturing HIT-66-274. Major Manufacturing HIT-66-274 10 páginas. Template for sargent “in” series cylindrical lock

Imprimir página

Use a 1" hole saw

and drill the wire

hole. Drill this hole

half way from both

sides of the door.

Back the hole saw

out once or twice

when drilling to clear

the chips from the

cut.

If installing the

optional external

DPS, drill this hole

with a 3/8" drill bit to

the wire chase hole.

Be sure to back the

drill bit all the way out

of the guide to clear

chips. This will require

a longer than normal

drill bit. If installing on

a steel door, increase

the 3/8" hole to 3/4"

with the use of a step

drill.

To drill the wire

raceway, remove the

drill plate on the

INSIDE of the door

and replace with the

auxiliary raceway drill

guide.

Major Manufacturing Inc

PAGE 7