Centurion A10 Series 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Centurion A10 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Centurion A10 Series 8 페이지. Industrial sliding gate operators
Centurion A10 Series에 대해서도 마찬가지입니다: 프로그래밍 매뉴얼 (4 페이지)

페이지 인쇄
Centurion A10 Series 빠른 시작 매뉴얼
3. Step-by-step installation instructions
400mm
1. Ensure that the foundation plate has
been properly installed. Refer to the
Installation Manual for details.
3. Screw the four M8x40 socket head grub
screws supplied with A10/D10/D10
Turbo into the threaded holes in the
base plate.
200mm
250mm
2. Remove all four captive nuts from the
underside of the gearbox as shown.
These are no longer required, as the
threaded holes in the cage baseplate
serve for height adjustment.
4. Place the base plate over the
foundation plate.
page 3