Centurion A10 Series 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Centurion A10 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Centurion A10 Series 8 페이지. Industrial sliding gate operators
Centurion A10 Series에 대해서도 마찬가지입니다: 프로그래밍 매뉴얼 (4 페이지)
페이지 인쇄
A
5. Place the gate motor over the base
plate, making sure that the four grub
screws and two mounting bolts from
the foundation plate fit through the
gate motor as shown.
7. Adjust the height of the gate motor by
tightening the four socket head grub
screws equally; making sure the gate
motor is level once complete.
B
6. Slide the gate motor forward or
backward so that the pinion will
correctly engage with the rack.
8. Assemble nut, spring washer, and load
spreader onto the mounting bolts.
page 4