Major tech MT350 사용 설명서 - 페이지 7

{카테고리_이름} Major tech MT350에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT350 8 페이지. Loop impedance & psc tester

8. BATTERY REPLACEMENT

1. When the low battery symbol " " appears on the LCD, the six 1.5V 'AA'

batteries must be replaced.

2. Turn the meter off and remove the test leads

3. Unsnap the tilt stand from the rear of the meter

4. Remove the four Phillips head screws holding the battery cover

5. Remove the battery compartment cover

6. Replace the batteries observing polarity

7. Affix the rear cover and secure the screws.

8. Reattach the tilt stand