Major tech MT350 Kullanım Kılavuzu - Sayfa 7

Ölçüm Cihazları Major tech MT350 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Major tech MT350 8 sayfaları. Loop impedance & psc tester

Sayfayı Yazdır

8. BATTERY REPLACEMENT

1. When the low battery symbol " " appears on the LCD, the six 1.5V 'AA'

batteries must be replaced.

2. Turn the meter off and remove the test leads

3. Unsnap the tilt stand from the rear of the meter

4. Remove the four Phillips head screws holding the battery cover

5. Remove the battery compartment cover

6. Replace the batteries observing polarity

7. Affix the rear cover and secure the screws.

8. Reattach the tilt stand