Major tech MT785 매뉴얼 - 페이지 12
{카테고리_이름} Major tech MT785에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT785 20 페이지. 1000 a ac/dc trms power clamp meter true rms
Major tech MT785에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지)
페이지 인쇄5.4. Resistance
1.
Insert the black test lead into the negative COM terminal and the
red test lead into the V
2.
Set the function switch to the Ω
3.
Touch the test probe tips across the circuit or component under
test.
4.
Read the resistance on the LCD display.
5.5. Capacitance Measurements
WARNING: To avoid electric shock, discharge the capacitor under test
before measuring.
1.
Set the function switch to the Ω
2.
Insert the black test lead banana plug into the negative COM jack
and the red test lead banana plug into the V
positive jack.
3.
Touch the test probe tips across the part under test. If "OL" appears
in the display, remove and discharge the component.
4.
Read the capacitance value in the display.
5.
The display will indicate the proper decimal point and value.
Note: For very large values of capacitance measurement it can take
several minutes before the final reading stabilizes.
5.6. Frequency Measurements
1.
Insert the black test lead banana plug into the negative COM jack
and the red test lead banana plug into the V
positive jack.
2.
Set the function switch to the AC V/AC A Position.
3.
Touch the test probe tips across the part under test.
4.
Read the value on the display.
5.
The display will indicate the proper decimal point and value.
12
CAP TEMP Hz Ω positive terminal.
).CAP position.
)
)
).CAP position.
)
)
CAP TEMP Hz Ω·
CAP TEMP Hz Ω