Major tech MT785 매뉴얼 - 페이지 13
{카테고리_이름} Major tech MT785에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT785 20 페이지. 1000 a ac/dc trms power clamp meter true rms
Major tech MT785에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지)
페이지 인쇄5.7. Temperature Measurements
1.
Set the function switch to the TEMP position.
2.
Insert the Temperature Probe into the negative COM and the
V
CAP TEMP Hz Ω positive jacks, observing polarity.
3.
Touch the Temperature Probe head to the device under test.
Continue to touch the part under test with the probe until the
reading stabilizes.
4.
Read the temperature on the display. The digital reading will
indicate the proper decimal point and value.
5.
Use the MODE button to select °C or °F.
WARNING: To avoid electric shock, be sure the thermocouple
probe has been removed before changing to another measurement
function.
5.8. Continuity Measurements
1.
Insert the black test lead into the negative COM terminal and the
red test lead into the V
2.
Set the function switch to the Ω
3.
Use the MODE button to select continuity "
will change when the MODE button is pressed.
4.
Touch the test probe tips across the circuit or component under
test.
5.
If the resistance is < 50Ω, a tone will sound.
CAP TEMP Hz Ω positive terminal.
CAP position.
" The display icons
13