Major tech MT941 사용 설명서 - 페이지 8
{카테고리_이름} Major tech MT941에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT941 12 페이지. 5-in-1multifunction environmental meter
Major tech MT941에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)
페이지 인쇄
5.9. Flow Unit
When one wants to change the flow unit. Enter
Flow Unit setup operation, Press or until the
display show CFM or CMM. Press
new setting in memory.
Notes:
CFM (ft³/min) = Air Velocity (ft/min) x Area (ft²)
CMM (m³/min) = Air Velocity (m/s) x Area (m²)
x60
CFM: cubic feet per minute
CMM: cubic meters per minute
5.10. Area Unit
When one wants to change the area unit,
enter area Unit setup operation. Press or
until the display show the unit you want to
change. Press
memory.
5.11. Area Size
1. When the meter is in Setup mode, press
or to scroll to the area size setup option.
2. Press
button. The secondary display
shows the area number and area unit. The
primary display shows the area being used.
Such as "S-3", that is "the three numbers of
area size setting". The numbers change
circularly from 1 to 6.
3. Press or
you want to change.
4. Press
to indicate that area number with a
flashing digit.
5. Press or
from 0 to 9.
6. Press
to change the station of flashing
D
digit and press or to change the number.
The adjust order is from right to left
7. Press
to store the new area in memory.
8
store the
to store the new setting in
to scroll to chose the area that
to change the flashing digit