Major tech MT941 사용 설명서 - 페이지 9

{카테고리_이름} Major tech MT941에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT941 12 페이지. 5-in-1multifunction environmental meter
Major tech MT941에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)

페이지 인쇄
Major tech MT941 사용 설명서

5.12. Auto Power Off Mode

The meter enters sleep mode (default). That is to
say, the meter will automatically shut off after 20
minutes if no button is pressed for 20 minutes. When
the meter is in Setup mode, the display shows
SETUP. Press or
to scroll to the" SLP" page.
Press
to indicate "On" or "OFF". Press or
the setting you want to use appears on the display.
Press
to store the new setting in memory. On
(sleep mode on)or OFF (sleep mode off).
5.13. Measuring RH% & Temperature
1. Connect the "RH% & Temperatures of Probe to the "Probe Input
Socket".
2. Press
to toggle showing the Temperature in the primary display.
3. Press
to toggle showing the humidity in the secondary display.
4. Press
will change the temperature units between °C and °F.
5.14. Measuring TYPE K Temperature
1. Hold or attach the thermocouple(s) to the measurement location.
2. Press
to toggle showing the TYPE K Temperature in the primary
display.
3. Press
will change the temperature units between °C and °F.
Notes:
The display shows "- - - -" when a thermocouple is not connected.
The display shows OL or -OL (overload) when the temperature being
measured is outside the thermocouple's valid range.

5.15. Measuring Sound

1. Press
to toggle showing the Sound in the secondary display.
2. Press
will switch between FAST and SLOW mode.
3. Press
will change the sound units between dBA and dBC.

5.16. Measuring Light

1. Connect the Light Probe to the "Probe Input Socket".
2. Press
to toggle showing the Light in the secondary.
3. lf Light of Probe is closed, secondary readings of the Light number
is not "0.000", press the
the Light .The meter will reset and display "0000" from right to
left. 0.000 will be display.
until
button for more than 2 seconds to zero
9