Major tech MT1883 사용 설명서 - 페이지 14

{카테고리_이름} Major tech MT1883에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT1883 16 페이지.

Note: If your meter does not work properly, check the fuses and

battery to make sure that they are still good and that they are

properly inserted.

7. Replacing the Fuses

Warning: To avoid electric shock, disconnect the test leads from any

source of voltage before removing the back cover.

Disconnect the test leads from the meter and any item under

test.

Open the back cover by loosening the screw on the back cover

using a phillips head screwdriver

Remove the old fuse from its holder by gently pulling it out.

Install the new fuse into the holder.

Always use a fuse of the proper size and value (0.2A/250V fast

blow for the 200mA range, 20A/250V fast blow for the 20A

range).

Put the back cover on by inserting the screw and tightening it

securely.

Warning: To avoid electric show, do not operate your meter until the

fuse cover is in place and fastened securely.