Major tech MT700 사용 설명서 - 페이지 11

{카테고리_이름} Major tech MT700에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Major tech MT700 16 페이지. Voltage & current tester

4.5. Voltage and Current Measured Simultaneously

• To simultaneously measure voltage and current, insert the test

leads into the meter and switch the meter on.

• Connect the test leads to the power source. On the voltage display,

the LCDs and LEDs will display the voltage measured.

• Place the clamp head over a single cable and the LCD display will

show the Amperage reading that is been measured.

• For AC voltage, the "AC" is illuminated; For positive voltage, the"+"

is illuminated; For negative voltage, the "-" is illuminated.

• In the case of DC voltage, the polarity of the indicated voltage

relates to the voltage tester probe tip.

• Once the safety extra-low voltage (50VAC/120VDC) is reached or

exceeded, the "

in the event of no battery power

or main circuit failure.

• Once voltage is applied to the

measuring instrument. press the

HOLD Button, the LCD and LEDs

display shows the recorded reading;

To delete the recorded value, press

the HOLD Button once again.

" is illuminated,