Major tech MT700 Інструкція з експлуатації - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Випробувальне обладнання Major tech MT700. Major tech MT700 16 сторінок. Voltage & current tester
Друкувати сторінку
4.5. Voltage and Current Measured Simultaneously
• To simultaneously measure voltage and current, insert the test
leads into the meter and switch the meter on.
• Connect the test leads to the power source. On the voltage display,
the LCDs and LEDs will display the voltage measured.
• Place the clamp head over a single cable and the LCD display will
show the Amperage reading that is been measured.
• For AC voltage, the "AC" is illuminated; For positive voltage, the"+"
is illuminated; For negative voltage, the "-" is illuminated.
• In the case of DC voltage, the polarity of the indicated voltage
relates to the voltage tester probe tip.
• Once the safety extra-low voltage (50VAC/120VDC) is reached or
exceeded, the "
in the event of no battery power
or main circuit failure.
• Once voltage is applied to the
measuring instrument. press the
HOLD Button, the LCD and LEDs
display shows the recorded reading;
To delete the recorded value, press
the HOLD Button once again.
" is illuminated,
11