CENTURION SYSTEMS D 10 설치 매뉴얼 - 페이지 7

{카테고리_이름} CENTURION SYSTEMS D 10에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CENTURION SYSTEMS D 10 8 페이지.
CENTURION SYSTEMS D 10에 대해서도 마찬가지입니다: 구성 매뉴얼 (2 페이지)

페이지 인쇄

SECTION 4

Always unlock the Discus

Padlock before placing the

Front Bar Assembly into

position.

Align the two holes in the Overstrap

with the two holes in the front of the

Gearbox, and insert the Front Bar

Assembly through the holes of the

Overstrap and Gearbox.

Push the Front Bar Assembly

completely through the Gearbox

and Overstrap, ensuring that the

bar extends out the back of the

Overstrap.

Wiggling the Overstrap from

front to back can assist the

Front Bar to slide all the

way through the Overstrap.

Take care when pushing

the Front Bar Assembly

through the Gearbox

Trim.

Forcing it may cause

damage to the Gearbox

Trim.

Lock the Front Bar Assembly into

position, remove the Key and store it

in a safe place.

The finished installation should look

as shown in Figure 7

5. Installation Handover

Once the Theft-deterrent Cage has been successfully installed and its operation tested,

it is important for the operation and safety considerations to be explained to the end-user

of the system.

D10 SMART THEFT-DETERRENT CAGE INSTALLATION

D10 SMART/

D10 TURBO SMART/

D20 SMART

Overstrap

Front Bar

Assembly

Front Bar

Assembly

page 7

Gearbox Trim

FIGURE 5

Overstrap

Gearbox

Trim

FIGURE 6

FIGURE 7