Jam HX-P430B 사용자 설명서 및 보증 정보

{카테고리_이름} Jam HX-P430B에 대한 사용자 설명서 및 보증 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Jam HX-P430B 2 페이지.

페이지 인쇄

Hey. Have we seen you here before?

Information like where you bought it and

how you're using it is like gold for the

people who make these speakers.

Do them a solid, will ya?

Por manual de instrucciones e información de garantía en español visítenos en

www.jamaudio.com

Thanks for the invite. We've got some pretty cool friends too, you

know? Check them out at www.jamaudio.com

Package Contents

User Manual

Speaker

Just Charge It

Charging the speaker is so easy you've

probably gured it out by now, but just in case,

you've got two options: your computer or a

wall outlet.

1. The cord that came with the speaker—the

one with the USB on one end and the

Micro USB on the other—will work

with your computer.

2. If you want to use the wall outlet, you'll

need to pick up a power cord with a

Micro USB the next time you're at the

store, or use any USB AC adapter,

including the one for your cell.

Now go get ready for an epic night while your speaker does too. It needs about 3

hours of me time to be fully charged for 8 hours of play.

Control Your Destiny...or at Least Your Speaker

1. Check out how much juice is in the battery.

2. That's the Mic.

3. Turn the music up or down. (Wait, why

do you need to turn it down?)

4. Push it to play, push it again to pause.

5. That light lets you know when Bluetooth

has the hook-up.

6. The power cord goes here.

7. That's the power button, press and hold

for 5 seconds to power on.

8. Plug in when you don't have Bluetooth.

9. It speaks too. Toggle between languages.

10. Language Selector Pin.

Bluetooth

Connection: It's a Setup

Like any amazing couple, this one starts with a connection—one between your

device and the speaker's Bluetooth.

Here's how it works:

1. We know you're probably going to think, "derp" with this one, but we have to

say it: Make sure the smartphone, tablet or computer you want to hook up to

the speaker has Bluetooth. (There. We got that out of the way.)

2. Turn on the speaker (press and hold for 5 seconds) and look for the little

blinking light.

3. Do whatever your device needs you to do on its end. (We don't know what

you're using. We're not spies.)

4. Look for JAM XT in your device's Bluetooth list or click YES—whatever pops

up on your device—and BAM! you're connected.

5. Now hit PLAY on your speaker and crank it up—or down if you're lame.

You're probably only going to have to do this once, unless your device goes

through a major I-just-dropped-it-in-the-pool kind of reboot. The device and

Bluetooth will nd each other every time just as long as the speaker is set to

Bluetooth and your device's Bluetooth is, you know—on.

If you're connecting to a computer, you may have some extra steps on that end.

You'll have to get that information from the computer company.

Depending on your device you may be prompted to enter a pairing code.

If prompted enter "0000" as the code. To clear the pairing history hold the

PLAY/PAUSE button for 5 seconds.

Note: If you turn on your XT but haven't started the party yet, it will

automatically power off after 2 minutes of unpaired inactivity.

Allow Us to Shed Some Light

What It Looks Like

Flashing RED

RED (while charging)

CHARGE

Light turns off (while

charging)

Quick Flash BLUE

Slow Flash BLUE

RED

Hooking Up Old School Audio, Jack

1. Plug one end of the cord into the speaker and the other into the headphone

jack on your device.

2. Turn on the speaker.

3. Hit PLAY on your device and crank it up—or down if you're lame.

You'll have to play and pause the music from your device, not your speaker.

No problem. You're there anyway, right?

EXTREME WIRELESS SPEAKER

USER GUIDE AND WARRANTY INFORMATION

LANGUAGE SELECTOR PIN

Language

Charging Cord

Selector Pin

What it Means

Low Battery

Charging

Fully Charged

Pairing Mode

Connected

Line-in Mode

HX-P430B