Jam HX-P430B User Manual And Warranty Information
Browse online or download pdf User Manual And Warranty Information for Speakers Jam HX-P430B. Jam HX-P430B 2 pages.
Print Page
Hey. Have we seen you here before?
Register your speaker at www.jamaudio.com
Information like where you bought it and
how you're using it is like gold for the
people who make these speakers.
Do them a solid, will ya?
Por manual de instrucciones e información de garantía en español visítenos en
www.jamaudio.com
Thanks for the invite. We've got some pretty cool friends too, you
know? Check them out at www.jamaudio.com
Package Contents
User Manual
Speaker
Just Charge It
Charging the speaker is so easy you've
probably gured it out by now, but just in case,
you've got two options: your computer or a
wall outlet.
1. The cord that came with the speaker—the
one with the USB on one end and the
Micro USB on the other—will work
with your computer.
2. If you want to use the wall outlet, you'll
need to pick up a power cord with a
Micro USB the next time you're at the
store, or use any USB AC adapter,
including the one for your cell.
Now go get ready for an epic night while your speaker does too. It needs about 3
hours of me time to be fully charged for 8 hours of play.
Control Your Destiny...or at Least Your Speaker
1. Check out how much juice is in the battery.
2. That's the Mic.
3. Turn the music up or down. (Wait, why
do you need to turn it down?)
4. Push it to play, push it again to pause.
5. That light lets you know when Bluetooth
has the hook-up.
6. The power cord goes here.
7. That's the power button, press and hold
for 5 seconds to power on.
8. Plug in when you don't have Bluetooth.
9. It speaks too. Toggle between languages.
10. Language Selector Pin.
Bluetooth
Connection: It's a Setup
®
Like any amazing couple, this one starts with a connection—one between your
device and the speaker's Bluetooth.
Here's how it works:
1. We know you're probably going to think, "derp" with this one, but we have to
say it: Make sure the smartphone, tablet or computer you want to hook up to
the speaker has Bluetooth. (There. We got that out of the way.)
2. Turn on the speaker (press and hold for 5 seconds) and look for the little
blinking light.
3. Do whatever your device needs you to do on its end. (We don't know what
you're using. We're not spies.)
4. Look for JAM XT in your device's Bluetooth list or click YES—whatever pops
up on your device—and BAM! you're connected.
5. Now hit PLAY on your speaker and crank it up—or down if you're lame.
You're probably only going to have to do this once, unless your device goes
through a major I-just-dropped-it-in-the-pool kind of reboot. The device and
Bluetooth will nd each other every time just as long as the speaker is set to
Bluetooth and your device's Bluetooth is, you know—on.
If you're connecting to a computer, you may have some extra steps on that end.
You'll have to get that information from the computer company.
Depending on your device you may be prompted to enter a pairing code.
If prompted enter "0000" as the code. To clear the pairing history hold the
PLAY/PAUSE button for 5 seconds.
Note: If you turn on your XT but haven't started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Allow Us to Shed Some Light
What It Looks Like
Flashing RED
RED (while charging)
CHARGE
Light turns off (while
charging)
Quick Flash BLUE
Slow Flash BLUE
RED
Hooking Up Old School Audio, Jack
1. Plug one end of the cord into the speaker and the other into the headphone
jack on your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up—or down if you're lame.
You'll have to play and pause the music from your device, not your speaker.
No problem. You're there anyway, right?
EXTREME WIRELESS SPEAKER
EXTREME WIRELESS SPEAKER
USER GUIDE AND WARRANTY INFORMATION
LANGUAGE SELECTOR PIN
Language
Charging Cord
Selector Pin
1
2
3
6
What it Means
Low Battery
Charging
Fully Charged
Pairing Mode
Connected
Line-in Mode
HX-P430B
4
3
5
10
7
8
9