IKEA OV10 사용자 설명서 - 페이지 14

{카테고리_이름} IKEA OV10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA OV10 24 페이지.
IKEA OV10에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

ENGLISH

Pull the rails away

from the oven wall at

the front.

To put the side rails back, follow the instruction

in reverse.

Important! The rounded ends of the guide

bars must point to the front.

Pyrolytic cleaning

Warning! The oven becomes very hot

during Pyrolytic cleaning! Risk of burns!

1. Remove from the oven all removable parts,

including the side rails and the meat probe.

2. Remove the worst residue manually.

3. Turn the oven function control knob to Py-

rolytic cleaning function

flashes on the display.

4. Push Pyrolytic cleaning button

firm.

5. Pyrolytic cleaning starts and

mains on the display.

What to do if...

Problem

The oven does not op-

erate

The oven does not op-

erate

The temperature indica-

tor does not come on

The oven lamp is not

working

Then unhook the rails

at the back.

to con-

Possible cause

The required setting have not

been set

The appliance is not correctly

connected or/and the mains

supply to the oven is not on

The required setting have not

been set

The oven lamp bulb is faulty

Pyrolytic cleaning process takes 2h 45

min. Do not open the door before the

process is completed. This will abort the proc-

ess.

To prevent from risk of burns, when the

oven reaches a certain temperature, the

door is automatically locked.

When the oven cools down, the door is auto-

matically unlocked.

Changing the oven lamp and cleaning the

glass cover

Warning! Before you change the oven

lamp (refer to "Product description"),

switch off the appliance and disconnect it from

the electrical supply.

1. Turn the glass cover anti - clockwise and

remove it. Clean the glass cover.

2. If necessary, replace the old oven lamp

with a 40 watt, 230V (50Hz), 300 °C heat

resistant oven lamp (Connection type:

E14).

re-

3. Refit the glass cover.

Check if cooking function and

temperature are selected

Check if the appliance is correctly

connected and the mains supply

to the oven is on

Select the cooking function and

temperature

Replace the oven lamp

Solution