IKEA OV10 사용자 설명서 - 페이지 6

{카테고리_이름} IKEA OV10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA OV10 24 페이지.
IKEA OV10에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

ENGLISH

Push-pull control knobs

Before first use

Remove all packaging, both inside and

outside the oven, before using the appli-

ance. Do not remove the rating plate.

When you connect the appliance to the elec-

trical supply or in case of a power cut, the Time

function indicator flashes automatically.

To set the current time use the Temperature/

Time control knob. After approx. 5 seconds the

flashing stops and the clock displays the time

of the day set.

If the time of the day is not set the appliance

does not work.

Initial cleaning

Clean the appliance before first use. Clean the

accessories and the oven interior with a soft

cloth with warm water and soap.

Setting the oven function

1. Turn the oven functions control knob to the

desired function

The oven is provided with push-pull control

knobs. You can sunk the push-pull control

knobs inside the control panel when the oven

is off.

Turn the push-pull control knobs clockwise to

set the temperature and the oven function.

After that preheat the oven up without food.

Preheating

Turn the oven function control knob to

run the oven for 45 minutes at maximum tem-

perature, to burn off any residue from the cav-

ity surface. Accessories can become hotter

than in normal use. During this period an odour

can be emitted. This is normal. Make sure the

room is well ventilated.

The display shows a suggested tempera-

ture.

The oven starts to heat up.

2. When the appliance reaches set tempera-

ture, an audible signal sounds one time (4

short beeps) .

and