Green Eco Pro Ultra 90 사용 설명서 - 페이지 11

{카테고리_이름} Green Eco Pro Ultra 90에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Eco Pro Ultra 90 15 페이지. Coolant purification systems

3. The location of Oil Lubrication & Filtration

1. 1 Check the level of oil lube on the air regulator unit by removing the top cover, if

required please refill with O.E.M recommended oil -TURBINE OIL ISO VG32.

2. 1 While disconnecting the air supply hose, the air regulator will drain some mist

automatically, be sure to check the incoming air supply. The supplied air should

be dry and free from contamination.

3.1.

Do not connect an air supply That Excesses 145 P.S.I. ( 10 bar)

4 Clean the coolant reservoir and the S.T.P.M module

1.1 To maintain a high performance of the unit, seasonal maintenance is

recommended. Remove the top cover to drain any residual coolant.

2.1 With the top cover removed, loosen the bolt to separate the STPM module.

Keep the STPM in one piece and then rise with clean water or high pressure air

to remove dust. Once completed, apply the same procedure on coolant reservoir

before reinstalling the STPM module.

3.1

Do not apply any chemical products or water with a temperature that exceeds

194 degrees (F) to STPM module.

Maintenance Guide – Page 2