Green Eco Pro Ultra 90 Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkt do pielęgnacji zwierząt domowych Green Eco Pro Ultra 90. Green Eco Pro Ultra 90 15 stron. Coolant purification systems
Drukuj stronę3. The location of Oil Lubrication & Filtration
1. 1 Check the level of oil lube on the air regulator unit by removing the top cover, if
required please refill with O.E.M recommended oil -TURBINE OIL ISO VG32.
2. 1 While disconnecting the air supply hose, the air regulator will drain some mist
automatically, be sure to check the incoming air supply. The supplied air should
be dry and free from contamination.
3.1.
Do not connect an air supply That Excesses 145 P.S.I. ( 10 bar)
4 Clean the coolant reservoir and the S.T.P.M module
1.1 To maintain a high performance of the unit, seasonal maintenance is
recommended. Remove the top cover to drain any residual coolant.
2.1 With the top cover removed, loosen the bolt to separate the STPM module.
Keep the STPM in one piece and then rise with clean water or high pressure air
to remove dust. Once completed, apply the same procedure on coolant reservoir
before reinstalling the STPM module.
3.1
Do not apply any chemical products or water with a temperature that exceeds
194 degrees (F) to STPM module.
Maintenance Guide – Page 2