IKEA SMAKSAK 사용자 설명서 - 페이지 29

{카테고리_이름} IKEA SMAKSAK에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA SMAKSAK 36 페이지.
IKEA SMAKSAK에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 사용자 설명서 (20 페이지), 매뉴얼 (32 페이지), 매뉴얼 (32 페이지), 매뉴얼 (16 페이지), 매뉴얼 (48 페이지), 매뉴얼 (36 페이지), 매뉴얼 (32 페이지), 설치 지침 (4 페이지)

페이지 인쇄

ENGLISH

Problem

The display shows an error

code that is not in this table.

There is no good cooking

performance using the func-

tion: Direct Steam.

There is no good cooking

performance using the func-

tion: Direct Steam.

The water in the cavity em-

bossment does not boil.

The water comes out of the

cavity embossment.

The lamp is turned off.

Service data

If you cannot find a solution to the problem

yourself, contact an Authorised Service

Centre.

The necessary data for the service centre is

on the rating plate. The rating plate is on

Possible cause

There is an electrical fault.

You did not turn on the func-

tion: Direct Steam.

You did not fill the cavity

embossment with water.

The temperature is too low.

There is too much water in

the cavity embossment.

The Eco Fan Cooking func-

tion is turned on.

the front frame of the oven cavity. Do not

remove the rating plate from the oven

cavity.

Remedy

• Deactivate the oven with

the house fuse or the

safety switch in the fuse

box and activate it again.

• If the display shows the

error code again, contact

an Authorised Service

Centre.

Refer to "Activating the func-

tion: Direct Steam".

Refer to "Activating the func-

tion: Direct Steam".

Set the temperature at least

to 110 °C.

Deactivate the oven and

make sure that the appli-

ance is cold. Wipe the water

with a cloth or sponge. Add

the correct amount of water

to the cavity embossment.

Refer to the specific proce-

dure.

Normal behaviour of the Eco

Fan Cooking function. Refer

to "Daily Use" chapter,

Heating Functions.