- ページ 29
オーブン IKEA SMAKSAKのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。IKEA SMAKSAK 36 ページ。
IKEA SMAKSAK にも： マニュアル (36 ページ), ユーザーマニュアル (20 ページ), マニュアル (32 ページ), マニュアル (32 ページ), マニュアル (16 ページ), マニュアル (48 ページ), マニュアル (36 ページ), マニュアル (32 ページ), インストレーション・インストラクション (4 ページ)
ページを印刷する
ENGLISH
Problem
The display shows an error
code that is not in this table.
There is no good cooking
performance using the func-
tion: Direct Steam.
There is no good cooking
performance using the func-
tion: Direct Steam.
The water in the cavity em-
bossment does not boil.
The water comes out of the
cavity embossment.
The lamp is turned off.
Service data
If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
Possible cause
There is an electrical fault.
You did not turn on the func-
tion: Direct Steam.
You did not fill the cavity
embossment with water.
The temperature is too low.
There is too much water in
the cavity embossment.
The Eco Fan Cooking func-
tion is turned on.
the front frame of the oven cavity. Do not
remove the rating plate from the oven
cavity.
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
an Authorised Service
Centre.
Refer to "Activating the func-
tion: Direct Steam".
Refer to "Activating the func-
tion: Direct Steam".
Set the temperature at least
to 110 °C.
Deactivate the oven and
make sure that the appli-
ance is cold. Wipe the water
with a cloth or sponge. Add
the correct amount of water
to the cavity embossment.
Refer to the specific proce-
dure.
Normal behaviour of the Eco
Fan Cooking function. Refer
to "Daily Use" chapter,
Heating Functions.
29