Airflow QT 150T 설치 및 운영 지침 매뉴얼 - 페이지 10

{카테고리_이름} Airflow QT 150T에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Airflow QT 150T 17 페이지. Quietair 150mm axial fan. twospeed fan (220/260m3 /hr) with delay start and adjustable timer contro

페이지 인쇄

Installation and Operating Instructions

6.3

DANGER

Fig 4

2. Boreholes

Position the housing, then mark and drill the holes and mount it with at least two

fastening screws and wall plugs.

3. Backdraft shutter and guide vane

- If required backdraft shutter (included in delivery) can be installed behind the guide

vane (Fig 6).

- During the housing installation, the guide vane should be mounted vertically.

- Before final assembly stick on the rubber foam strips (included in delivery) (Fig 6).

Fig 6

Electrical installation/Commissioning

Safety instructions listed in Chapter 1.2 should be observed

All electrical installations to be carried out by an approved electrician

in accordance with presented manual and wiring diagrams.

Fan should be fitted with a 3A fuse at all times.

The relevant standards, safety regulations (for instance DIN VDE 0100)

and technical connection regulations of the energy supply company

should be observed!

An all-pole mains switch/isolation switch, with at least a 3 mm contact

opening (VDE 0700 T1 7.12.2 / EN 60335-1) is mandatory by law!

Network configuration, voltage and frequency of the power source

should match the information on the rating plate.

Fig 5

Fig 7