Green Feathers NCIP2WF 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Green Feathers NCIP2WF에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Feathers NCIP2WF 16 페이지. Wifi bird box camera

Getting Started

1 Attaching the bracket

Find the green camera bracket and two tiny black screws.

The arms of the bracket can be bent inwards and securely

attached to the camera by lining it up with the holes on the

sides of the camera. In some cases it is easier to mount the

bracket to the bird box first and then attach the camera.

2 Inserting the MicroSD Card

If you are using a microSD card for recording storage, insert

this into the slot gently with the pins facing the lens. Ensure

that you insert the card before powering up the camera.

For best signal range, keep the antenna pointing up and away

from the camera.

3 Powering up the camera

Plug in power supply into the trailing cable of the camera and

remove the lens cap. Allow 30 seconds for the camera to boot.

You should hear the camera click once it has booted up.

The reset button is only used during setup and for factory

resets.