Green Feathers NCIP2WF Skrócona instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Aparat cyfrowy Green Feathers NCIP2WF. Green Feathers NCIP2WF 16 stron. Wifi bird box camera

Drukuj stronę

Getting Started

1 Attaching the bracket

Find the green camera bracket and two tiny black screws.

The arms of the bracket can be bent inwards and securely

attached to the camera by lining it up with the holes on the

sides of the camera. In some cases it is easier to mount the

bracket to the bird box first and then attach the camera.

2 Inserting the MicroSD Card

If you are using a microSD card for recording storage, insert

this into the slot gently with the pins facing the lens. Ensure

that you insert the card before powering up the camera.

For best signal range, keep the antenna pointing up and away

from the camera.

3 Powering up the camera

Plug in power supply into the trailing cable of the camera and

remove the lens cap. Allow 30 seconds for the camera to boot.

You should hear the camera click once it has booted up.

The reset button is only used during setup and for factory

resets.