Gandy 24H12 운영자 매뉴얼 - 페이지 7

{카테고리_이름} Gandy 24H12에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gandy 24H12 10 페이지. 24” & 36” spreaders
Gandy 24H12에 대해서도 마찬가지입니다: 운영자 매뉴얼 (8 페이지), 운영자 매뉴얼 (8 페이지)

페이지 인쇄

Bottom Disassembly Instructions:

Occasionally it will be necessary to disassemble the stainless bottom for cleaning.

Some materials will build up in between the slide and the bottom especially when atmospheric humidity is high.

1. Remove the 5/16" wing nut, washer and cam gauge from bottom assembly.

Diagram A

2. Measure the distance from the edge of the bottom to the edge of the rear hanger and write that down.

See Diagram B. You will use this dimension to reassemble the bottom.

Diagram B

3. Remove the 3/16" flange nuts and nylon washers from the rear hanger.

Note: The 36" bottom has 4 nuts and washers. The 24" bottom has 2.

Diagram C

~5 ~

OPP-36-24-A1