Green Gorilla ProLine Em 사용자 설명서 - 페이지 7

{카테고리_이름} Green Gorilla ProLine Em에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Green Gorilla ProLine Em 20 페이지. Industrial system

Wand Handle Assembly

To attach your wand handle to the tank, a 9/16" wrench is required. The 1/4" NPT

wand hose tting is pre-wrapped with Te on tape to ensure a leak tight joint.

Thread the wand hose tting into the end of the wand handle and tighten in a

clockwise direction using the 9/16" wrench. All Green Gorilla tank hoses and wand

handles use the standard 1/4" NPT tting.

g. 4

AC70: TheAC70 wand extension is assembled to the AC70 wand handle as outlined

in Figure 6. The tip will be preinstalled.

Pro31: Figures 16 - 20 detail the assembly of the Style A or B tip to the Pro31 wand

extension. The Pro31 wand extension is assembled to the Pro31 wand handle as

outlined in Figures 7 - 11.

PS30: The PS30 Wand extension is assembled at the factory and tested. No assem-

bly is required.

AC70 Extension

Assembly

Assemble the wand

extension to wand handle.

Tighten the wand exten-

sion nut by hand in the

clockwise direction to

ensure a tight seal

between seating surfaces.

Securely hold the wand

handle in place while

tightening.

Do not over tighten.

Wand Hose Fitting

g. 6

g. 5

Pg. 6