Green Gorilla ProLine Em Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Краскопульт Green Gorilla ProLine Em. Green Gorilla ProLine Em 20 страниц. Industrial system
Печатать страницуWand Handle Assembly
To attach your wand handle to the tank, a 9/16" wrench is required. The 1/4" NPT
wand hose tting is pre-wrapped with Te on tape to ensure a leak tight joint.
Thread the wand hose tting into the end of the wand handle and tighten in a
clockwise direction using the 9/16" wrench. All Green Gorilla tank hoses and wand
handles use the standard 1/4" NPT tting.
g. 4
Wand Extension Assembly
AC70: TheAC70 wand extension is assembled to the AC70 wand handle as outlined
in Figure 6. The tip will be preinstalled.
Pro31: Figures 16 - 20 detail the assembly of the Style A or B tip to the Pro31 wand
extension. The Pro31 wand extension is assembled to the Pro31 wand handle as
outlined in Figures 7 - 11.
PS30: The PS30 Wand extension is assembled at the factory and tested. No assem-
bly is required.
AC70 Extension
Assembly
Assemble the wand
extension to wand handle.
Tighten the wand exten-
sion nut by hand in the
clockwise direction to
ensure a tight seal
between seating surfaces.
Securely hold the wand
handle in place while
tightening.
Do not over tighten.
Wand Hose Fitting
g. 6
g. 5
Pg. 6