decon INFM7212 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} decon INFM7212에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. decon INFM7212 8 페이지. Liberty mounting set

Mounting set

INFM7 Infinity Mounting set Universal

__________________________________________________________________________________

3. Assembly and adjustment of adaptor

First mount the holder (D) onto the bar (F)

and secure it by using the screws (H). Now

mount the preassembled parts onto the

wheelchair by using the chassis clamps (G),

see picture as example. The distance X from

the edge of the seating cushion to the

holder (D) should be, if possible, 20-30mm

so that the upper pin of the center pipe

adapter bar (A) is visible outside the edge of

the seating cushion.

The distance Y should not be greater than

20mm to ensure that the bar (F) gets

sufficient support. The front clamp (G)

should be mounted as close as possible to

the holder (D).

Tighten the screws in the clamps (G) just

enough to grip the wheelchair chassis so

that the bar (F) can still be adjusted inside

the clamps.

Assemble both sides.

__________________________________________________________________________________

Sida 4/8