decon INFM7212 조립 지침 매뉴얼 - 페이지 5

{카테고리_이름} decon INFM7212에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. decon INFM7212 8 페이지. Liberty mounting set

Mounting set

INFM7 Infinity Mounting set Universal

__________________________________________________________________________________

WARNING!

One clamp (G) is to be mounted on each

side of the holder (D) to avoid that the bar

breaks due to fatigue stress.

Now mount the complete adapter bar that

consists of center pipe (A), outer pipe (B)

and clamp (C). The complete adapter bar is

mounted into the holders (D) by using the

QR-pins (E).

Make sure the ends of the outer pipe (B)

are parallell otherwise it can be hard to

assemble it into the holders (D). It shall be

possible to move the center pipe sideways

and also rotate it if correctly assembled.

Now tighten the screws in all of the clamps (G).

INFO

Check that the arrow on the labeling mounted on the center pipe (A) is pointing towards the

front of the wheelchair. If the center pipe (A) is mounted the wrong way around it will not be

possible to attach Liberty to the bar.

7-9Nm of torque (M6)

10-15Nm of torque (M8)

__________________________________________________________________________________

Sida 5/8