IKEA MATMASSIG 매뉴얼 - 페이지 22

{카테고리_이름} IKEA MATMASSIG에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. IKEA MATMASSIG 28 페이지.
IKEA MATMASSIG에 대해서도 마찬가지입니다: 매뉴얼 (24 페이지), 매뉴얼 (44 페이지), 매뉴얼 (44 페이지), 매뉴얼 (28 페이지), 매뉴얼 (48 페이지), 매뉴얼 (36 페이지), 매뉴얼 (28 페이지), 매뉴얼 (44 페이지), 매뉴얼 (29 페이지), 매뉴얼 (12 페이지), 매뉴얼 (48 페이지)

페이지 인쇄
IKEA MATMASSIG 매뉴얼
ENGLISH
If the feeding gas pressure is
different or variable from the
required one, you must install an
appropriate pressure adjuster,
which is not supplied with the
product. If needed, it must be
ordered separately from the
local After Sales Service Provider,
refer to the Guarantee chapter.
The pressure adjuster must be
fitted on gas supply pipe, in
compliance with AS/NZS
5601:2013.
The rating plate is located below the
surface of the casing.
Adjusting flame level
When you install the hob, it is necessary to
check the minimum flame setting:
1. Turn the gas tap to the maximum
position and ignite.
2. Set the gas tap to the minimum flame
position and turn the control knob from
minimum to maximum several times. If
the flame is unstable or extinguished,
follow the procedure further.
3. Re-ignite the burner and set to
minimum.
4. Remove the control knob and the
gasket.
5. To adjust, use a thin bladed screwdriver
and turn the adjustment screw until the
flame is steady and does not extinguish.
When the knob is turned from minimum
to maximum, and vice versa (see
following picture).
6. Repeat this procedure for all burners.
22